GROW K200-3.3+R502 New Multi-function K200-3.3 Fingerprint Access Control board+R502 Fingerprint Module

stars, based on 0reviews
$19.90now$19.60 piece
Quantity Price
10+ $18.82
999items available
Contact Us
OR
Description

K200-3.3 Technical Parameters

·Fingerprint capacity: 120
·Power supply: 4*AA battery or DC5V
·Stand-by mode current: less than 5 uA
·Output: DC5--6V,500mA
 
K200-3.3 VCC and VT is for 3.3V, only suitable for R502 fingerprint module.
 

K200-3.3 Operation Instruction

1.Press SET button shortly,system in administrator register status and blue indicator light flash fast, press two times for each fingerprint, fingerprint register successfully when hearing music.Fingerprint can be registered continuously,and it can register 20 pieces administrator fingerprint. If no need for adding fingerprint, waiting for 6seconds or press the SET button to exit.
 
2.When back to factory default, press SET button until hear “Di-Di-Di” beep and release the button,means initialization operation successful.
 
3.Register User Fingerprint: Press the administrator fingerprint until hear the music and blue indicator light flash fast, means can add user fingerprint.Press two times for each user fingerprint, fingerprint register successful when hearing music. Fingerprint can be registered continuously, it can register 100 pieces user fingerprint.
 
4.Delete User Fingerprint:Press the administrator fingerprint when hear the music and blue indicator light flash fast, move the finger until hear “DiDiDi” long deep, than all user fingerprints are deleted.
 
5.Mode selection,setby the toggle switch:
a) 1:ON, 2:ON Output DC5V and keep 0.5 second; stop 5 seconds,then minusvoltage outputted and keep 0.5 seconds.
b) 1:ON, 2:OFF Output DC5V and keep 5 second
c) 1:OFF, 2:ON Output DC5V and keep 1 seconds
d) 1:OFF, 2:OFF Keeping output DC5V until removing the finger
 
6.OPEN(P3):
a) 1:ON, 2:ON Output DC5V and keep 0.5 second; stop 5 seconds,then minusvoltage outputted and keep 0.5 seconds.
b) 1:ON, 2:OFF Output DC5V and keep 5 second
c) 1:OFF, 2:ON Output DC5V and keep 1 seconds
d) 1:OFF, 2:OFF No Output
 
Note:
1.    When the voltage is less than DC4.7V, the red light lightens, means the low voltage warning.
2.    In the “D” mode,when need to register user fingerprint,after press the administrator fingerprint successfully,lifting the finger then press the same administrator finger again until hear the music and blue indicator light flash fast,then it can register user fingerprint.
  
 
 
R502 Specifications
·Interface:RS232 (TTL)
·Resolution:508 DPI
·Voltage:DC 3.3V
·Working current(Fingerprint acquisition):18mA      
·Standby current(finger detection): Typical touch standby voltage: 3.3V, Average current: 2uA
·Fingerprint capacity:200
·Sensing Array:192*192 pixel
·Fingerprint reader module size: diameter 22mm
·Effective collection areadiameter 15mm
·Connector: MX1.0-6pin
·LED Color: Bule and Red
·ScanningSpeed:< 0.2 second
·Verification Speed:< 0.3 second
·Matching Method:1:1; 1:N
·FRR (False Rejection Ratio):≤0.01%
·FAR (False Acceptance Ratio):≤0.00001%
·Antistatic capacity:15KV
·Abrasive resistance intensity:1 million times
·Peak power consumption:60 mA
·Work environment:-20°C ---55°C
·Work Humidity:0-90%
·Communications baud rate (UART):(9600 × N) bps where N = 1 ~ 12(default N = 6, ie 57600bps)
 
 
 

Images

 

4

6

5

-1

 

-1

 

 

​K200-3.3 Circuit board diagram

2

R502 fingerprint module circuit board diagram

R502-F-

 

Set Button circuit board diagram

8
7
 
 
Package Listing
1
Brand Name:
grow
Model Number:
K200-3.3+R502
Fingerprint capacity:
120
Power Supply:
4*AA battery or DC5V
Output:
DC5--6V, 500mA
Standby mode current:
less than 5uA