-
Shopping Cart (0)Cart Total:
Your cart is currently empty..
GROW K202+R301T DC10-24V Low Power Consumption Fingerprint Access Control Board+R301T Capacitive Fingerprint Module
Description
·Provide Free Reference SDK Files for Arduino, Android,.Net,Windows and so on.
·Provide User Manual
·P1: Power supply: DC10V--24V
·Output: Relay(Max. current:10A)
·Standby current: 15uA
·Fingerprint capacity: 120 pieces
·Size: 64.4*25.4mm
·P2: MX 1.0mm space 6 Pin Fingerprint Module(can connect R502,R502-A,R503)
·P3: MX 1.25mm space 6 Pin Fingerprint Module(can connect R300,R301T,R303,R303T,R305,R306,R307,R501)
·Output: Relay(Max. current:10A)
·Standby current: 15uA
·Fingerprint capacity: 120 pieces
·Size: 64.4*25.4mm
·P2: MX 1.0mm space 6 Pin Fingerprint Module(can connect R502,R502-A,R503)
·P3: MX 1.25mm space 6 Pin Fingerprint Module(can connect R300,R301T,R303,R303T,R305,R306,R307,R501)
K202 is designed for low power consumption, the power supply is DC10V-24V, the relay time can be adjusted by rotating the button, relay time: 0.5-13 seconds.
It is very easy to register fingerprint, just need to press SET button to register fingerprint and long press SET button to back to factory default.
1.SET Button:
Press SET button shortly,blue indicator light flash fast and system in register state, put the finger on fingerprint collection area, fingerprint register successful when hearing music. Fingerprint can be registered continuously when system in register state; if no need adding fingerprint more, waiting a few seconds.
2.Back to factory default:
Press SET button until hear “Di” long beep and music,means initialization operation successful.
3.Set Relay Time:
Rotate K2 to set the closing time of the relay from 0.5 to 13 seconds. The relay is contact output, switch signal, no voltage output.
4.Usage:
Press the finger,the relay closes after the fingerprint passes, and the closing time is determined by K2.
Note: 1. All indicator lights are off in standby state, and the lights are on in working state;
2. Any fingerprint can be used in the factory state, but the function will be invalid after the fingerprint is registered.
K202 can be used together with R300,R301T,R303,R303T,R305,R306,R307,R501,R502,R502-A,R503 fingerprint module
| Model | R301T |
| Type | Capacitive Fingerprint Module |
| Interface | USB,UART(RS232 TTL) |
| Resolution | 508 DPI |
| Voltage | DC 4.2-6V |
| Fingerprint Capacity | 3000 |
| Sensing array | 192*192 pixel |
| Fingerprint module size | 33.4*20.4*1.0(mm) |
| Effective collection area | 10 * 10 (mm) |
| Scanning Speed | < 0.2 second |
| Verification Speed | < 0.3 second |
| Matching Method | 1:1; 1:N |
| FRR | ≤0.1% |
| FAR | ≤0.001% |
| Work environment | -20C ---50C |
| Work Humidity | 10-85% |
| Anti-static capacity | 15KV |
| Abrasive resistance intensity | 1 million times |
| Communications baud rate (UART): | (9600 × N) bps where N = 1 ~ 12(default N = 6, ie 57600bps) |
·Provide User Manual
You can download the R301T user manual from this website link:
You can dowload the K202 user manual from this website link:
https://www.dropbox.com/sh/9itshhkx0r9mdyt/AABPH-Dhleve3A1Mn5ZA34pCa?dl=0
If need SDK files,pls contact us.
K202 Circuit board diagram
R301T fingerprint module circuit board diagram
- Brand Name:
- grow
- Model Number:
- K202+R301T
- Fingerprint capacity:
- 120
- Power Supply:
- DC 10V--24V
- Standby current for control board:
- 15uA
- K202 Size:
- 64.4*25.4mm
- Output:
- Relay(Max. current:10A)
- R301T Size:
- 30.4*20.4mm
Your cart is currently empty.